[WhiteSnow]

wondering if anyone knows if you can Take the Breaks and the Axle s form a 94 v6 mustang and Put the on a 92 mustang GT 5.0 i am asking this becuse i want Dis breaks on the back of my 92 but i would like to convert the car to 5 Lug that way i have more weels to chose form i unless some one knows a place were i can get 17 x 10.5 weels that are 4lug for the back and 17x 7 or 17x 8 in the front with the proper weel spaceing
i will check back tomarrow to see if any one has any info on this subject thanks agin

[lxarlo]

i believe you can do this, just make sure to get all the brackets off of the other car. mainly caliper brackets. and e brake cable brackets. i know the calipers are the same as a gt and so are the rotors, but im almost positive that you can use the axles too. you will also need the master cylinder, and optional booster. you will also need a 3-2 line conversion kit sold at www.maximummotorsports.com also a proportioning valve, and modify the distribution block. check out www.mustangmotorsport.com too for some good info.