[Mr_Land_Yacht]

I'm putting a H.O. Cam from a 5.0 Mustang into my Mercury and I'm wondering what the specs are on it...(lift, duration, etc)

I'd appreciate any information on this...

thanks, guys!

[bj_newton08]

The lift is .444 on both sides, sorry I dont knowthe duration off hand

[Mr_Land_Yacht]

thanks for the info!

[tmoss]

the cams changed, but duration varies significantly due to semi-sloppy grind tolerances. Most come in at 204-212 degrees @ .050" lift. The specs were 266/266 and 276/266 degrees of advertised (.006" lift) duration. The speed density cams had faster ramp rates.