here are a few pics of the fan I mentioned in another post. It just rained muddy rain so the car/engine is a bit dirty. Also, pics of the new 03 CObras and the dashboard:thumbsup
All you did was install the fan backwards (basically) so that the air is being pulled instead of pushed, then switched the polarity on the wires so the fan would run backwards, with no issues, and you are running cooler than before?
And was it difficult to install? Any suggestions for those of us who may be interested in a similar install?
My coolant system is getting a huge overhaul at the end of this month: new Heavy-Duty, High Flow water-pump, New Radiator, Electric Fan, and a 180* Thermostat... and if you were able to do this and you're car is running 15* cooler... yeah, I'm interested!
sorry about the late reply. That AC Vent radio mount,.. I made it. A 1/4" piece of aluminum, an AutoMeter gauge cage as a template, some fine grit sand paper, and a can of black paint. Tada! Thanks for compliments guys!