I just bought a 1990 LX 5.0, the guy I bought it from gave me a list of mods done, as well as reciepts and work orders. Anyhoo, I know what most of the stuff is, however there is an item called a "pizza box kit", it cost $339, and I have no clue what is is..It was installed at the same time as the headers, fuel pressure regulator, and a hurst competion shifter. I'm not horribly worried about it, just intrigued.
Thanks in advance guys......
__________________
Grover
1990 LX 5.0 HO-- center force clutch(heavy duty);Hurst competition short throw shifter; 3.55's;Pro-M air w/ K&N; 65MM throttle body and spacer;1.72 Roller rockers; 1/2 inch plenum spacer; Big Tube Headers; pizza box kit??; Fuel pressure reg and gauge; GT-40 heads(ported and flow tested); Pulley Kit; 24LB injectors, Chip(not sure which one); 180 thermostat; Flowmaster off road X-pipe(no cats); 110 lph fuel pump; mobile1 5-30 synthetic; Corbeau VX2000 racing seats.5 lug conversion..
no idea. i would call the shop that did the work and ask them. their number should be on the receipt.
maybe he used the car for pizza delivery, and a special warming compartment installed in the glove box?
__________________
1965 Mustang Coupe Project: 1965 Mustang Inline 6 (For Now) Coupe, New Floors, New Quarters | Ford 9 Inch Rear, 11" Rear Disc Brakes, 3.50:1 Gears | Control Freak Front U/L Control Arms, Global West Adj. Strut Rods | KYB Gas-A-Justs, Grab-A-Trak 620 Coils & Mid-Eye 5-Leafs | Global West Tubular Subframe Connectors | Addco 1-1/8 Front Swaybar Kit
no such luck there, the part was done there close to 10 years ago, the shop is now closed. however, i can safely say its no a glove compartment mod, it's still tiny.....
__________________
Grover
1990 LX 5.0 HO-- center force clutch(heavy duty);Hurst competition short throw shifter; 3.55's;Pro-M air w/ K&N; 65MM throttle body and spacer;1.72 Roller rockers; 1/2 inch plenum spacer; Big Tube Headers; pizza box kit??; Fuel pressure reg and gauge; GT-40 heads(ported and flow tested); Pulley Kit; 24LB injectors, Chip(not sure which one); 180 thermostat; Flowmaster off road X-pipe(no cats); 110 lph fuel pump; mobile1 5-30 synthetic; Corbeau VX2000 racing seats.5 lug conversion..
Naahhh, she's not juiced, I'll have to get that list of stuff together and put it in my sig, and i'll throw in a couple photos(wherever i put those), and go from there.....
__________________
Grover
1990 LX 5.0 HO-- center force clutch(heavy duty);Hurst competition short throw shifter; 3.55's;Pro-M air w/ K&N; 65MM throttle body and spacer;1.72 Roller rockers; 1/2 inch plenum spacer; Big Tube Headers; pizza box kit??; Fuel pressure reg and gauge; GT-40 heads(ported and flow tested); Pulley Kit; 24LB injectors, Chip(not sure which one); 180 thermostat; Flowmaster off road X-pipe(no cats); 110 lph fuel pump; mobile1 5-30 synthetic; Corbeau VX2000 racing seats.5 lug conversion..
Please help me figure out this part... 
