Hi, I have an 8.8 rear that I am trying to install in my 84' GT to replace the 7.5. I have an E6SW-BA 8.8, not sure what it came out of but I'm pretty sure it wasnt a Mustang. Does anyone know what this rearend came out of? Thanks
You might want to PM Foxchassis, he could probably tell you.
__________________
1992 Deep Emerald Green Mustang GT Hatch, 5 speed, 2.73s, Mac fenderwell cold air intake, '93 Cobra MAF, Mac 70mm throttle body & spacer, Explorer intakes, Mac unequal headers & offroad pipe, Magnaflow catback, Walbro 110lph fuel pump, Jet adjustable FPR, MSD Blaster coil, Accel 8mm wires, FRPP aluminum quadrant, UPR firewall adjuster, stock cable, Granatelli upper control arms.
Waiting to go on: Granatelli lower control arms, and GT40 Iron heads!
Ok, so this is what i have now:
Im positive its an 8.8" but it has drum brakes and the casting code on the 3rd member is E6sw-BA. Any ideas if this will fit a 84' Mustang? I'm not a 8.8" expert !
Thanks for the help!
The T-bird rearend is slightly wider, but will work.
__________________
1992 Deep Emerald Green Mustang GT Hatch, 5 speed, 2.73s, Mac fenderwell cold air intake, '93 Cobra MAF, Mac 70mm throttle body & spacer, Explorer intakes, Mac unequal headers & offroad pipe, Magnaflow catback, Walbro 110lph fuel pump, Jet adjustable FPR, MSD Blaster coil, Accel 8mm wires, FRPP aluminum quadrant, UPR firewall adjuster, stock cable, Granatelli upper control arms.
Waiting to go on: Granatelli lower control arms, and GT40 Iron heads!
8.8 questions in 84' GT 
