 Anyone have trouble with rings seating, anyone use sealed power R9771035 plasma moly
Just wondering if anyone has used the Sealed Power,speed pro, federal mogul R9771035 plasma moly rings,, if so any trouble with them seating, about how long did it take for them to "fully" seat, i have about 300miles on my new 347 build, have a little bit of a problem with crankcase pressure, did the v/c breather thing helped out a bunch, now going back and putting in another PCV on drivers side v/c and an oil catch can, compression is 148-152#s on all cylinders, it drives good but lots of crankcase pressure and blue smoke out the back, #4 plug was wet with oil, that couldve been the bogging issue i had, got new autolite 25s gapped to 50 close to stock,, anyone have any thoughts/suggestions | 
