[Ford]

I want to build a 351w with something like 500-600 hp fuel injected....so can you tell me a good setup to achieve this, Im open to all ideas but I would prefer N/A and kinda streetable, Im not really familar with the 351 so I just need some help with good combinations and compression ratios

[rangerout]

one thing you want to watch for is there are diffrent deck heights on the 351w.
the 2nd thing is than the 5.0 brackets wont work with the 351w because of the diffrent deck heights. i am building a 5.8l out of a 84 cop car for a 90 notch back. the 351w is also extral balance so flywheel is diffrent