Today on my way to work, on the freeway i was going about 65 coming to a stop and bam!!! a loud noise comes from the right rear tire.
I think its out of the rear end, yet im not sure!
Now when driving, i all i hear is a off set wifing noise. I hear it on a costant wif, wif, wif upon accerlation. when i let go of the gas on 5th gear it goes away.
Has anyone ever encountered this problem! any ideas or input would be appreciated..thanks
__________________
91, 5.0 5spd, AFR 165 heads, e303 cam, Edelbrock upper and lower Intakes, bbk egual Headers, bbk 70mm tB, 70mm spacer, 75mm pro mass/24#inj- 1.7 trick flow RRs, BBK Ford R Crome valve covers, Hurst short throw shifter, Edelbrock true roller chain, BBk off road H-piipe, Flowie cat backs, Frame Connectors, Granitily Rear ajustable lower arms, 3.73 gears, Black magic Electric Fan, Under pullies, Ford Racing alum Rad, Msd ignition, 18" cobras, 12"JL audio subs, Rockford Fosg AMP,
Did U Replace The Back Brake DRums With Cheap Ones?
Yes, and I'm getting this noise.
Please elaborate.
I was thinking brakes also, when I read Nick's post.
__________________
1992 Deep Emerald Green Mustang GT Hatch, 5 speed, 2.73s, Mac fenderwell cold air intake, '93 Cobra MAF, Mac 70mm throttle body & spacer, Explorer intakes, Mac unequal headers & offroad pipe, Magnaflow catback, Walbro 110lph fuel pump, Jet adjustable FPR, MSD Blaster coil, Accel 8mm wires, FRPP aluminum quadrant, UPR firewall adjuster, stock cable, Granatelli upper control arms.
Waiting to go on: Granatelli lower control arms, and GT40 Iron heads!
OK BOIS, after a total check up, ive come to a conclusion...
Ring and Pinion are shot. It broke about 2 Ring teeth off the gear. Well and if you read my Sig you notice i was under the assumtion that i had 3.55. Wel they turned out to be 3.73's.....
Today i ordered all the parts( Ukon Ring and pinion, Install kit, and all new bearings.... Total was $230.36 and will install them today. See ya boies and good luck.
__________________
91, 5.0 5spd, AFR 165 heads, e303 cam, Edelbrock upper and lower Intakes, bbk egual Headers, bbk 70mm tB, 70mm spacer, 75mm pro mass/24#inj- 1.7 trick flow RRs, BBK Ford R Crome valve covers, Hurst short throw shifter, Edelbrock true roller chain, BBk off road H-piipe, Flowie cat backs, Frame Connectors, Granitily Rear ajustable lower arms, 3.73 gears, Black magic Electric Fan, Under pullies, Ford Racing alum Rad, Msd ignition, 18" cobras, 12"JL audio subs, Rockford Fosg AMP,
Rear End making wiffing noise 
