[CaptainSkyhawk]

Just finishing up replacing my harmonic balancer on my SN95, and I just wanted to get the expert opinion here in this forum as to the appearance of my crankshaft front/nub/part that the harmonic balancer sticks to.

One side:
http://www.allfordmustangs.com/photopost/data/500/medium/crankBal_008.jpg

T' other:
http://www.allfordmustangs.com/photopost/data/500/medium/crankBal_011.jpg

Also, here's a picture of my old harmonic balancer and my new one:
http://www.allfordmustangs.com/photopost/data/500/medium/crankBal_004.jpg

Farked up, wasn't it? Plus, does the new one look bigger for some reason?

[highwayinthesky]

i had my damper off today as well but it was cause i wanted to swap crank pullies. the crank looks all right, i didnt see the key slot but i will assume it is there. by the way how did you seperate the pully from the damper cause mine will not come apart and i tried all day and eveything i could think of would work.

[CaptainSkyhawk]

what year do you drive? if it's a 95 or before like mine (I assume), the crankshaft pulley should be held onto the balancer with four bolts. if it's one of those ones on late-model mustangs that I've heard is all once piece, then beats me!