[OneBad93]

I'd like to start doing my own brake jobs (pads and bearings) on my 1993 GT. The Ford shop manual, Haines, Chilton really don't have clear pictures or instructions when it comes to the bearings. Has anyone seen anything on the web that clearly explains how to do the job?

thanks

[Adrian]

I have a 1990 fox and I've replaced the front rotors, pads, calipers and bearings. It's pretty easy you'll be fine. The Hanes isn't bad for instructions. When I replaced the rotors, the new ones had the bearing races already pressed into them which was nice. It meant that all I had to do was grease everything up good, put the bearing in on the right sides and put it together. If you are not replacing rotors just check the races that will be pressed into the inside of your rotors before you put the new bearing in. There are torque specs to follow as well in the hanes


Let me know if you have any specific questios... I'll do my best to answer them. Make sure to check your sway bar links too. I replaces those at the same time.