Ford Mustang Forums - View Single Post - 1966 Maverick Disc to 1966 Mustang
View Single Post
Unread 07-27-2007   #2 (permalink)
The Greek
The Greek is offline Senior Member

Classic Member
5.0L Member


Joined: Nov 2006
Posts: 3,174 Threads: 1
 The Greek's Country Flag
Jacksonville   Florida
The Greek is on a distinguished road
Default

I believe it will. The steering knuckles may have to be checked to see if the outer tie rod ends are compatable with your 66. If they are like the Granada steering knuckles the size is different and you will have to use those that are specific to the Maverick. As on the Granada knuckles the upper and lower ball joints for the 66 should fit. Go to www.napapartsonline.com and check to see if the component part numbers for the ball joints and tie rod ends are the same for the Maverick and Granada. I'm using the 77 Granada disc set up on my 67 fastback and I only had to use the outer tie rods for the Granada to make things work. In my opinion the Maverick is more like the Mustang than the Granada. This info is specific to the V8 Maverick, I'm not sure about the 6 cyl. discs. Good luck, ---Chuck
The Greek is offline   Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162