| | 1995 Mustang oil pressure gauge question...
When I got my 95 GT, the oil presure gauge didnt work. A few times Iv noticed it is working, but never enough to count on it.
I tryed to unhook the sending unit wire and run it to ground, and then turn on the key to see if it moved, and it didnt.
This is telling me the gauge its self is the problem, NOT the sending unit...Correct?
Whats involved with swapping out the OEM gauge?
I KNOW....go with a REAL gauge, but I hate the idea of having the stock gauge reading well below zero, even with a Autometer installed...
Am I just wrong in that grounding the sensor wire, should move the needle, and Im missing something
1995 GT Stock other than 3.73 gears
327 HO stroker (331 w/std. bore), AFR Heads, Ported Cobra Intake, BBK 70mm TB, 30 lbs Injectors, 255 lph fuel pump, Nitrous, C4 Automatic Trans
, Dana 20 Transfer case, D35 front TTB, w/ARB, 8.8" rear - 4.56 Gears, 32x10.5 Swampers, 3" lift, Safari Snorkel