[DanG98v6]

I've been doing some, I admitt not alot, research into these two items. I came here to get some more understanding.

I believe to have a stock fit I need heads/intake from a 97 or older. 97 and newer would require new pistons?

Would the intake fit under my factory front strut tower brace?

I'd love to get AFR 165s or something, but I dont have the cash. I was told this would help some and not set me back too much.

I have a 1994 AOD E 5.0, hoping with these, and a few other mods I'll hit over 300.

Still deciding on what chip I want to get, if you have any suggestions for that as well

[samotrx7]

Not new pistons you would need new headers and possibly depending on emissions on where you live would have to get them drilled and tapped for the egr port I believe. The intake looks somewhat similar to the intake on your car now so I think it will clear your strut tower brace.

[EagleAutosports]

The intake may clear as long as you don't use an intake spacer. Other than that, everything should bolt right on.