Quote:
Originally Posted by bigstangs  anyone running edelbrock rpm intake i need to know where the vacuum lines go |
if you read # 9 with regard to vacuum line hook up that shouls sove your problem.... the rpm as a differnt configuration than the stock one
http://www.jegs.com/InstallationInst.../350-71231.pdf
To smooth the crossover, we have eliminated the
stock
vacuum tree. Use the 3/8” NPT 90-degree
elbow and 3/8”NPT to 3/16”hose fitting in the rear
facing 1/8” NPT boss on the crossover (next to the
EGR plate). Use the
vacuum line supplied and
“tee” to feed the fuel pressure regulator and the
MAP sensor from this source
anyone running edelbrock rpm intake 
