SN95 TrickFlow Track Heat Install Help

supertomcat · 02-05-2009

Hi All,
I got a great deal on a brand new, still in the box track heat upper and lower manifold set. I am getting ready to install it, and decided this time I shall read the instructions before tearing down the car.

I have two questions, I have a 94 GT with already a 70-75mm throtle body ( i dont remeber) and cold air, the instructions recommend, two part numbers that refer to a strut tower brace. My GT has one installed from factory..

Do i need a different one, will the current strut tower brace clear the track heat manifold?
I looked around online and the two part numbers like dont exist, or at least google did not think they did.
Do I even need to worry.

Here are the two part numbers TFS-8529501 and TFS-M20201-A51

Also any advice or short cuts/pit falls i may have installing the Track Heat, let me know too..

Thanks in advance

Anthony

**RLG34750** · 02-05-2009

Here is the strut tower brace that will work for you......

BBK_STRUT_TOWER_BRACE

Rejoin the Herd · 02-05-2009

Brace Add says 86 - 93, will this brace work with 94-95? When I purchased a track heat for my 94, tech rep at Summit said I did not need a different brace. I have not installed new motor with track heat yet, so I do not know about brace fitting.

Anyone know the real skinny on this brace fit issue.

Thanks

**RLG34750** · 02-05-2009

Quote:

Originally Posted by Rejoin the Herd

Brace Add says 86 - 93, will this brace work with 94-95? When I purchased a track heat for my 94, tech rep at Summit said I did not need a different brace. I have not installed new motor with track heat yet, so I do not know about brace fitting.

Anyone know the real skinny on this brace fit issue.

Thanks

yes it will fit the 94 if you read into the ad it says so....

taken from the ad....
The robotically welded BBK Design is now available to fit all Mustang applications (except 99-04 Cobra) and fits with most engine modifications.

**EagleAutosports** · 02-05-2009

I have that intake and it's a lot bigger than the stocker, you'll have to change the brace. Edelbrock also makes a brace to fit 94-95 models with aftermarket intakes.

Rejoin the Herd · 02-07-2009

The robotically welded BBK Design is now available to fit all Mustang applications (except 99-04 Cobra) and fits with most engine modifications.[/color][/i][/quote]

Thanks for the info.
Fred

stanger007 · 02-08-2009

I'm running the Maximum Motorsports brace and really like it. It will clear as well.

Wes