[Conan]

i wanna know what gears i have, on the door post under "ax" it says "m" can anyone tell me something about this, automatic 95 gt

[Vortex]

sounds like you got 2.73's what i had in my 95 5-spd

Conventional Lock Rear Axle Ratio

G H 2.26
B C 2.47
8 M 2.73
7 - 3.07
Y Z 3.08
4 D 3.42
F R 3.45
5 E 3.27
6 W 3.73
2 K 3.55
A - 3.63
J - 3.85

[GTRaptor]

Damn....... 2.73s on a AODE? ,that is weird, i thought all AODEs had 3.27s

go get some 3:73s !

If you want to verify, jack the rear up and slide under. make a mark on the bottom inside sidewall of one rear tire. Make a mark on the bottom of the driveshaft. Rotate the wheel one full revolution and count the number of revolutions the DS makes. 2.75=2.73's, 3.5 = 3.55's, 3.75= 3.73's etc. Or you can open up the pumpkin and count gear teeth then divide the larger by the smaller.

[rski02]

Look under the rear of your car at the differential and there should be a thin metal tag that says what gear ratio you have. If it is 2.73 it will say 2L73, I think. The L stands for locker. It would be in some order. I will look at mine and confirm. Hope this helps.

Ummm if the L stood for anything it would be "Limited". As in Limited Slip. It is not a locker. Very different animal that is not meant for the street.

[spyder]

traction lock is ford's term for POSI rear end. not like litereally lock where both wheels spin ALL the time.

[GT Dan]

Vortex....are those codes just for 94-95 GTs?

What other Ford rear axles will work in my 95 GT and swap right over with 5 lugs and my disk brakes/ABS and driveshaft length?

Will 96-98 axles work or are they different parts?