[v8powerv8jim]

Im fitting some halos to my 94 Gt,can anyone verify the following for me if you have them fitted ?

What lights up on yours,ie

Headlamp knob one click out?

Knob fully out?

Knob fully out & turn signal stalk pushed forward?

Knob pulled fully out and turn signal stalk pulled toward driver?

thanks

[RCRacer94gt]

What are yours doing?

I dont have them on but I would guess halo turns on with parking lights on, thats one click.

[BrantRaynor]

When I pull the headlight knob out once, just the side markers light up. When I pull the knob out fully, my low beams come on with the halos and the 3 l.e.d.s on the headlight. When I push the stalk forward, my high beams come on temporarily as long as I am pushing the stalk forward. When I pull the stalk towards me, the stalk clicks into place and the high beams stay on. Hope that helps at all.

[typerider]

mine were as follows;

knob out 1-click = parking lights/halo rings

knob out all the way = low beams/parking lights/halo rings

high beams on = halos on/low beams off/high beams on

be sure to sand around the corners or they will have a nasty fender rubbing situtation. just test fit a few times. have fun.

[v8powerv8jim]

Thanks for your input guys,just wasnt sure if mine were working right!

Mine is
knob out one click-halos and 3 L.E.D.S

knob fully out-halos,L.E.D.S,and low beam

push stalk forward & hold-low beam goes out,high beam lights up,halos and L.E.D.S

pull lever towards driver-everything lights up mentioned above

[RCRacer94gt]

take pics!