Installed BBK 75 mm throttle body on my 94 gt. The mounting holes for the TPS do not allow the throttle blade to properly align with the stock TPS. Anyone ever had this problem and know how to fix. Is there an after market TPS that works with the BBK throttle body? Thanks
Are you meaning it will mount, but you cannot get the proper .96 voltage?
I have a 70mm BBK. No problems intially mounting the TPS, but the voltage was off significantly when bolted down. I had to oblong the bolt holes (vertically) to appear more egg shaped using a drill bit, giving increased adjustment, to get the proper voltage.
__________________
1994 Vert with 347, all forged rotating assembly with 5.315 H-beam rods, windaged, girdled, Comp Cams XE282HR, ported Vic Jr heads, ported Vic Jr. Spyder intake, 1.7 RR's, #42 lbs injectors, BBK 75mm, 76mm C&L, Alum. drive shaft, Strange Adjustable Front Struts, BBK Lowers, Adj uppers, 3.73's, Nitto 555R's.
Trouble filling the void with enough speed or power? - take GOD for a test drive
You are correct, I have no adjustment to get proper voltage. I thought about making the holes oblong, but was not sure it would work. Thanks for the information, I will try elongated hole.
TPS/BBK Throttle blade alignment problem 
