I have heard that Transgo makes a great Auto shift Kit, are the expensive, will they decrease my 1/4 times and what not? It says on the site I can install it in 10 min, is that true? also they have 2 or 3 different kits, which is the best? is there a better company that makes these?
Don't waste your money, on a shift kit by any of them. If you want your tranny to shift better, swap out your valve body it will last longer. And to be honest, yeah it's more expensive but it will shift much better. It will shorten your 1/4 mile time also, a set of 4.10 gears would drop it even more. Both combined with a good set of sticky tires, could drop your 1/4 mile time by 4 - 5 tenths along with a good tune, Mike. SCT Tuner.
Don't waste your money, on a shift kit by any of them. If you want your tranny to shift better, swap out your valve body it will last longer. And to be honest, yeah it's more expensive but it will shift much better. It will shorten your 1/4 mile time also, a set of 4.10 gears would drop it even more. Both combined with a good set of sticky tires, could drop your 1/4 mile time by 4 - 5 tenths along with a good tune, Mike. SCT Tuner.
but a shift kit like transgo comes with new valves as well as springs and other goodies.
do the kit, i love mine but when i bought it as far as i know they only made 1 kit so i dont know which one i have.
__________________
94 gt aode baumannator,pi stallion 3000 stall,transgo,mega bite jrs,3.90 gears,31 spine moser axles,comp exteme,1.7 roller rockers,190 pump,mac cold air,ford 1 5/8 unequals, off road h,flowmaster 2 chamber with stainless tails,msd box,PIH(a9p computer ajustable fan controler),q1a k-member,kenny brown frame ties,driveshaft loop,air pump eliminator kit,bbk 70mm tb,pro-m bullit meter,24#injecters,ported heads&intake,and all the little bolt ons.
If someone is telling you that you can install the new springs, valves and balls into the valve body of an AODE in 10 minutes. Slap him with an old length of muffler moly. He's lying to you.
__________________
Those who beat their swords into plowshares, will surely plow for those who did not.
I have a Baumann valve body reprogramming kit in mine and I love it! I took my time and did it over 2 days. The reprogramming kit allows you to calibrate each shift point's firmness and not RPM range. I have a pretty much stock engine and have barked it once or twice. Also, I didn't calibrate it to the firmest shifts, so you can always go back and increase the firmness.
I've had the transgo hd2 in about 2 months now and love it. I had a busted spring in mine and now it shifts so smoooooooooooooth compared to the jerking i would get between 1st and 2nd. I had someone else install but i would definitly go with the transgo!!
Do any of you guys with the kit installed know if it raised the speed at which the trans shifts on light throttle? For example when shifting from 1st to 2nd when pulling away from a light slowly!
Transgo AODE Shift Kit 
Fantastic!
