1995 Mustang GT Fuel Injectors not working

BFD325 · 08-12-2009

I have a 1995 Ford Mustang GT. I drove it to the store, it was running great, came back out and it wouldnt start. Symptoms- with just the ignition on the electric fan comes on (never did before) The injectors are not pulsing according to my test light. It does fire over with a little starting fluid. So far I have changed the CCRM, Temp sensor, temp sender, and also ignition control module. Still nothing. Im thinking maybe Hall Effect sensor in the distributor next??? ANY help would be greatly appreciated. Thanks

**EagleAutosports** · 08-13-2009

I think you're on the right path, it's probably the Hall Effect sensor (pickup) inside the distributor. It's what actually tells the computer what injector to fire next and for how long, it can go out at anytime without warning. What you describe sounds like it to me.

BFD325 · 10-16-2009

thanks for the help, I finally gave up on it and put it in the shop and it ended up being the computer. One of the terminals were grounding out. Finally got it back from the shop and the mechanic forgot to plug my electric fan back in and I didnt think to check behind him so of course I get in traffic and it starts running really really hot. I finally figured that out and plugged it back in. Other than a injector wire being loose and causing me lots of stress- changing spark plugs, wires, cap, rotor. FINALLY finished with the engine (i hope) now to the clutch oh what fun

**EagleAutosports** · 10-17-2009

The main thing is now you got it fixed and running.