09-10-2003
|
#1 (permalink)
| | |  Noise That Won't Quit
i am getting a high pitched off and on squeeking noise from my front passenger side wheel when i turn left at low speeds. any ideas?
__________________ 95 BLACK GT:
EDELBROCK PERFORMER RPM HEADS (PORTED AND POLISHED), FMS "X" CAM, EDELBROCK PERFORMER INTAKE (PORTED AND POLISHED), VORTECH 73 mm MAF, EDELBROCK 70mm THROTTLE BODY, CRANE 1.7 ROLLER ROCKERS, 24 LB INJECTORS, BASSANI 1 3/4 STEPPED 1 7/8 LONG TUBES, MAC 2.5 IN PROCHAMBER, 2 CHAMBER FLOWMASTERS, UNDERDRIVE PULLEYS, 3.90 GEARS, 195 gph PUMP, BBK COLD AIR INDUCTION, X2C TEMEC TKO.
Last edited by Twister; 09-11-2003 at 11:50 AM.
| 
|  | |
09-11-2003
|
#2 (permalink)
| | |
dust sheild scrapping maybe
__________________ 1995 Mustang GT 5.0 HO
Mods: March Under Drive Pulleys, BBK CAI, MAC Full Length Headers & Hi-Flow H-Pipe With Cats, Flow Master 2 Chambers, BBK Caster/Camber Plates, Ebiach Sportline Springs , KYB Gas Adjust Shocks & struts, K&N Filter Charger, 180 degree thermostat, 3:73 FMS, Catapult Trailing Arms, BBK 255Lbph And Adjustable Regulator, Gripp Subframes, Cobra RR Hood, Red Top Battery, Pro 5.0 Shifter, Zex 75 Shot System, 1/4 Inch Wheel Spacers Rear, M&M 6 Point Cage
Plans  Stroke It And | |
| | |
09-11-2003
|
#3 (permalink)
| | |
i'll check that out.
__________________ 95 BLACK GT:
EDELBROCK PERFORMER RPM HEADS (PORTED AND POLISHED), FMS "X" CAM, EDELBROCK PERFORMER INTAKE (PORTED AND POLISHED), VORTECH 73 mm MAF, EDELBROCK 70mm THROTTLE BODY, CRANE 1.7 ROLLER ROCKERS, 24 LB INJECTORS, BASSANI 1 3/4 STEPPED 1 7/8 LONG TUBES, MAC 2.5 IN PROCHAMBER, 2 CHAMBER FLOWMASTERS, UNDERDRIVE PULLEYS, 3.90 GEARS, 195 gph PUMP, BBK COLD AIR INDUCTION, X2C TEMEC TKO.
Last edited by Twister; 09-11-2003 at 11:51 AM.
| |
| | | |
