Go Back   Ford Mustang Forums > Mustang > 5.0 Mustang > 94-95 Tech

Welcome to our Mustang forums where Mustangers come together to hang out, discuss and enjoy their favorite Mustang hobby with fellow Mustang enthusiasts. We invite everyone to read, post, and enjoy our Mustang forum as well as the many other sections of our site.

You are currently viewing our forums as a guest. By joining our community you gain access to post topics, communicate with members, upload your photos and access many other special features. Registration is fast, simple and free so why wait, join our Mustang community today! If you have any problems with registration or your account login, please contact support.

1994-1995 5.0 Mustang SN95 Tech Forum

5.0L Talk | 5.0L Tech | 94-95 Tech | 1979-1993   1994   1995   Upload Pictures | Timeslips | Power Adders | Mustang Tech 


Reply   Post New Thread
Unread 09-10-2010   #1 (permalink)
gelo is offline Rookie

V6 Member
5.0L Member


Joined: Sep 2007
Posts: 38 Threads: 29
 gelo's Country Flag
Amarillo   Texas
gelo is on a distinguished road
Default Help swapping a 5.0 into a 1999 mustang ?please

hi, I just bought a 95 mustang gt donor car to swap the engine into my 99 mustang v6 with a blow head gasket, since the emission is not an issue ,well I started swapping everthing and it went pretty good ,motor is in,tranny,exhaust,ecu harness,etc, but the only problem is hooking up the 3 connectors by the computer plug under the dashboard on the passenger side since they are a different shape and don't match the ones on the 99 mustang v6 and it looks like the one from the 99 mustang has more wires than the 95 mustang gt, I was just reading the thread about this guy swapping a 5.0 into a 99 mustang gt and I saw someone gave this guy an idea using a computer harness from an explorer or mountanier and I'm just wondering if you'd give me a hand and tell me how to do this swap? Or, if you know the pinout on those connectors from the 99 mustang v6 and the 95 5.0 ecu harness so I can cross wires to make it work, I can send pictures if necessary. I really need help from the mustang master guys.I appreciate any help thanks.
gelo is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Sponsored Links
Advertisement
 
Unread 09-10-2010   #2 (permalink)
gelo is offline Rookie

V6 Member
5.0L Member


Joined: Sep 2007
Posts: 38 Threads: 29
 gelo's Country Flag
Amarillo   Texas
gelo is on a distinguished road
Default Help swapping a 5.0 into a 99 mustang ?please

hi, I just bought a 95 mustang gt donor car to swap the engine into my 99 mustang v6 with a blow head gasket, since the emission is not an issue ,well I started swapping everthing and it went pretty good ,motor is in,tranny,exhaust,ecu harness,etc, but the only problem is hooking up the 3 connectors by the computer plug under the dashboard on the passenger side since they are a different shape and don't match the ones on the 99 mustang v6 and it looks like the one from the 99 mustang has more wires than the 95 mustang gt, I was just reading the thread about this guy swapping a 5.0 into a 99 mustang gt and I saw someone gave this guy an idea using a computer harness from an explorer or mountanier and I'm just wondering if you'd give me a hand and tell me how to do this swap? Or, if you know the pinout on those connectors from the 99 mustang v6 and the 95 5.0 ecu harness so I can cross wires to make it work, I can send pictures if necessary. I really need help from the mustang master guys.I appreciate any help thanks.
gelo is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Unread 09-11-2010   #3 (permalink)
Stevan26 is offline Made Member


Joined: May 2009
Posts: 503 Threads: 56
 Stevan26's Country Flag  View Stevan26's 14 photos
Crookston   Minnesota
Stevan26 is on a distinguished road
Default

icant help. but the build sounds fun, is the 5.0 motor stock? r u gonna build it? if so wut? and what are you useing for a rear-end? the 7.5 in ur v6 or the 8.8 off the 5.0 body? and is it a stick or auto? useing same gears in the Rear-end? haha sorry for all the Q's im just curious!
__________________
2008 Shelby GT500, Torch RED with black stripe combo. HIDS, Shaker 1000, Ambient lighting.

FRPP intake
FRPP KR Shifter
Steeda 2.65 Pulley
Bassani axle back
Stevan26 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Unread 09-11-2010   #4 (permalink)
Githerz is offline Apprentice

Classic Member
V6 Member
5.0L Member


Joined: Mar 2010
Posts: 105 Threads: 12
 Githerz's Country Flag  View Githerz's 12 photos
Jennings County   Indiana
Githerz is on a distinguished road
Send a message via MSN to Githerz Send a message via Yahoo to Githerz
Default

I would think you would have to buy a computer that goes to a 95 GT. Especially given that they did different things 99+ versus 94/95.
I'm not sure there is a product that can adapt them for you. However I could be verrrrrry wrong.
Githerz is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Unread 09-11-2010   #5 (permalink)
gelo is offline Rookie

V6 Member
5.0L Member


Joined: Sep 2007
Posts: 38 Threads: 29
 gelo's Country Flag
Amarillo   Texas
gelo is on a distinguished road
Default

yeah the motor is stock so far with a 95 cobra intake and is my original standar from my v6 the fits rigth in and about the rear end I still have it the 7.5 stock from the car but Im thinking swap a gt off it 99-04 mustang gt
gelo is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Unread 09-14-2010   #6 (permalink)
paul289 is offline PONY Member

Classic Member
5.0L Member


Joined: Feb 2008
Posts: 841 Threads: 45
 paul289's Country Flag  View paul289's 14 photos
Marysville   Washington
paul289 is on a distinguished road
Default

If the '95 still has the computer in it, use that as well as the rest of the wiring harness. The v6 transmission might not last very long, and it might be a good idea to replace it with a heavy-duty T5. Make sure you use the 94/95 input shaft and bellhousing with it, as the later t5s are slightly longer to put the shifter farther back. Also, the 7.5 likely won't last very long either, so you may want to replace that soon. And a slightly stiffer suspension will bring the handling and ride back in line, too.
__________________
Proud owner of a '65 289 coupe w/ C4. Equipped with Edelbrock Performer intake, 600 cfm carb, Comp Cams Xtreme Energy valvetrain with XE262H cam, MSD ignition, and ported heads. Suspended by 600# 1" drop front and stock rear springs, KYB shocks front, 1" front sway bar, 1" Shelby drop, Griggs Racing GR350 rear suspension. Many more mods to come!
paul289 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Unread 09-17-2010   #7 (permalink)
302Feen is offline SHELBY GT 350 Member


Joined: Jan 2008
Posts: 6,940 Threads: 279
 302Feen's Country Flag  View 302Feen's 71 photos
Norman   Oklahoma
302Feen is on a distinguished road
Default

Is the '95 donor car complete? With rear end, transmission, computer, etc.?

If so, just swap everything over to the '99. They are basically the same body/chassis so everything should go right in. Although I have heard that the New Edge rear ends are slightly wider than the SN95's...
__________________
-1994 Mustang GT "The Red Baron": 3.73 gears,K&N filter,GT40 tubular intake,BBK Full Length Headers,modified midpipe & Flowmaster muffs, timing at 12*. Best time- 14.74 @ 93.16
-Check profile for pics of our car collection!
- AmericanMuscle ROCKS!!
- "True Hot-Rods don't have valve covers!"
302Feen is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Unread 09-17-2010   #8 (permalink)
YLDPONY is offline SHELBY GT 350 Member

5.0L Member


Joined: Nov 2009
Posts: 8,798 Threads: 46
 YLDPONY's Country Flag  View YLDPONY's 29 photos
Thornville   Michigan
YLDPONY is on a distinguished road
Default

Yes, the new edge rear ends are ~3/4" wider. 7.5s are not as bad as everyone makes them out to be. They will handle 450 HP, just not with slicks bolted to it. With an almost stock 5.0 swapped in your V6 rear will be fine.
Remember guys, LS1 powered F-body cars only ever had 7.5" rears from the factory.

Anyway, pictures of your wiring harnesses that don't match up would be priceless
__________________
'94 Laser red 'vert. Still a 5-oh... for now
YLDPONY is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Unread 09-17-2010   #9 (permalink)
302Feen is offline SHELBY GT 350 Member


Joined: Jan 2008
Posts: 6,940 Threads: 279
 302Feen's Country Flag  View 302Feen's 71 photos
Norman   Oklahoma
302Feen is on a distinguished road
Default

Quote:
Originally Posted by YLDPONY View Post
Yes, the new edge rear ends are ~3/4" wider. 7.5s are not as bad as everyone makes them out to be. They will handle 450 HP, just not with slicks bolted to it. With an almost stock 5.0 swapped in your V6 rear will be fine.
Remember guys, LS1 powered F-body cars only ever had 7.5" rears from the factory.

Anyway, pictures of your wiring harnesses that don't match up would be priceless
Would that 3/4" +/- make enough difference to matter? That doesn't seem like it'd be drastic enough to make it not fit.

Did those Chevys use the SAME 7.5" rear end the V6 Mustang uses?
__________________
-1994 Mustang GT "The Red Baron": 3.73 gears,K&N filter,GT40 tubular intake,BBK Full Length Headers,modified midpipe & Flowmaster muffs, timing at 12*. Best time- 14.74 @ 93.16
-Check profile for pics of our car collection!
- AmericanMuscle ROCKS!!
- "True Hot-Rods don't have valve covers!"
302Feen is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Unread 09-17-2010   #10 (permalink)
paul289 is offline PONY Member

Classic Member
5.0L Member


Joined: Feb 2008
Posts: 841 Threads: 45
 paul289's Country Flag  View paul289's 14 photos
Marysville   Washington
paul289 is on a distinguished road
Default

Actually, the extra 3/4" width will help fill out the wheel wells a bit better. I think there's about 1" between the fender and the wheel, so the wider axle will put the wheels 3/8" closer to the fenders on each side.
__________________
Proud owner of a '65 289 coupe w/ C4. Equipped with Edelbrock Performer intake, 600 cfm carb, Comp Cams Xtreme Energy valvetrain with XE262H cam, MSD ignition, and ported heads. Suspended by 600# 1" drop front and stock rear springs, KYB shocks front, 1" front sway bar, 1" Shelby drop, Griggs Racing GR350 rear suspension. Many more mods to come!
paul289 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Unread 09-17-2010   #11 (permalink)
YLDPONY is offline SHELBY GT 350 Member

5.0L Member


Joined: Nov 2009
Posts: 8,798 Threads: 46
 YLDPONY's Country Flag  View YLDPONY's 29 photos
Thornville   Michigan
YLDPONY is on a distinguished road
Default

Quote:
Originally Posted by paul289 View Post
Actually, the extra 3/4" width will help fill out the wheel wells a bit better. I think there's about 1" between the fender and the wheel, so the wider axle will put the wheels 3/8" closer to the fenders on each side.
Quote:
Originally Posted by 302Feen View Post
Would that 3/4" +/- make enough difference to matter? That doesn't seem like it'd be drastic enough to make it not fit.

Did those Chevys use the SAME 7.5" rear end the V6 Mustang uses?
Chevys don't use the exact same 7.5" rear as Fords do, but they are very similar. People talk about the 7.5 and 8.8 like they are two completely different animals. Both rear ends use the same:
-Axle bearings (on mustangs and rangers, F150s have bigger bearings on their 8.8s)
-Axle shafts (Same case as above)
-Pinion bearings

The only difference is the diameter of the ring gear, but more importantly the contact width of the gearset. I'm not denying the 8.8 is a much stronger piece, but unless someone is making a bunch of cheater slick passes with a mild build, it is not going to break immediately. If treated with respect it will last a long time.

As for the width, in my opinion 94-98 rear ends are about an inch too narrow. There is a reason they widened it for the new edge cars. Notice that new edge cars fill out their rear wheel wells better than SN95 cars do with the same wheels. This is why.

One advantage is that 7.5" V6 cars came with a 3.45 gearset, while most 8.8" V8 cars came with 2.73s, 3.08s or 3.27s if you're really lucky.
__________________
'94 Laser red 'vert. Still a 5-oh... for now
YLDPONY is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Unread 05-26-2011   #12 (permalink)
The_Mustang is offline PONY Member

5.0L Member


Joined: Sep 2009
Posts: 252 Threads: 1
 The_Mustang's Country Flag
Jax   Florida
The_Mustang is on a distinguished road
Default

I know this thread is a little old, but I figured I'd chime in on this thread as it contains some useful information and I'm in the process of doing this exact same swap.

As far as the 99 V6 T5 being week, that's not the case. It is actually stronger than most stock T5's that Ford installed prior.

Basically to do this swap you need all the harnesses in the car to be changed: Body harness, engine harness, dash harness, all of them!

OP, did you ever get yours finished up? How did it turn out? Pics/Vids???
__________________
1999 Mustang - Converted to 94 spec 5.0 EFI,
Vortech V2 SQ 12 psi, BBK shorties, Edelbrock Perf. intake,
The_Mustang is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Sponsored Links
Advertisement
 
Reply   Post New Thread



Thread Tools



Mustang Photos
Mustang Links    Top Sites    RSS    Link To Us    Add to Favorites    Archive    Terms of Use    Site Rules    Privacy    Contact    Sponsors    Advertise   
AllFordMustangs is not affiliated with or endorsed by Ford Motor Company. ©Copyright 2002-2011 All Auto Enthusiasts Network

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162