[bretske_GT95]

Hi Friends i hope everybody´s fine, i have a question please somebody Help me, i want to make a Stroker from my 302 to 331with OEM Ford Parts, thats because here in my city the Ford Dealer give me Plant Price for the parts around 50% off the regular price, so that´s why i want to buy a OEM Ford Parts for my Stroker, my friend GTRaptor give me a Table o parts to make a stroker but i take this info to the Ford Dealer and they tell me that they need the specific part of the car...example for the rods, wich other Ford car or truck have the rods to make a 331 stroker...the model, year and engine of the car/truck, so that is were i need your konwledge..i need the Crank, Rods and pistons for make my Stroker 331, and a better Ford OEM Camshaft for this stroker, i´m gonna put a GT4Op alumium heads and GT0 uper and lower intake, but i need to know wich other Ford Car/Truck have the right part to make this stroker, and i want to know if in this other OEM parts Ford handle Forged pieces to.
thanks for the Help...
byeeee

[kyle_c_21]

rods are 5.4 inches long. the pistons are 30 over, but i belive theres some difference that just 30 over pistons, and a 3.25 stroke crank. not sure what if anything these came stock in, but theres some numbers and hopefully u can find something.

[bretske_GT95]

Well..thanks guys...i´m goona look for this parts in an other part, and i have to buy all the kit complete.
thanks again.....se you

[jruppert]

You can leave stock bore if using a new block and your engine would be a 327. The benefit to that would be if something happened to the engine then you can always bore it.