 Tight fit under hood with Otima battery.
i needed a new battery so i bought a optima red top today. i have a 95 GT.
i just want make those of you who are planning to buy this battery aware that the fit is VERY tight under the hood. you DO NOT want to slam the hood down as the battery is a little on the tall side. the molding under the hood sits right on top of the battery. the hood will close but you will have to gently push it down. and you will notice that the hood sits slightly higher on the drivers side, but you really wouldnt notice unless you were looking for something wrong.
just wanted to share the info.
__________________ 1995 Mustang GT 5.0
BBK CAI, Pro-M 75mm MAF, Pro-M Optimizer, BBK 70mm TB, GT-40 Intake, 24# Injectors, AFR 165's, 1.7 Roller rockers, Crane 2040 cam (E-303) BBK Equal Length headers, BBK O/R X-pipe, Flowmaster American Thunder 2 Chambers. FMS 3.73 Gears, Lentech AODE 2800 stall, BBK 255lph Fuel Pump, BBK Fuel Pressure Regulator. MSD 6AL, Steeda UDP's, FMS Aluminum drive shaft, Autologic chip Larocca tune. | 
