[94scgt]

has anyone used this edelbrok lower and upper intake does it give noticeable power? and how hard its to install? thnx

[93mustang]

I have an Edelbrock Performer upper and lower intake on my car. I didn't install it . It was on the car when I bought it. It seems like a pretty easy install. Check out their website for instructions or e-mail them with any questions. They are very good at getting back to you and answering any questions. Make sure you use the reccomended throttle body with the intake. 70mm. Edelbrock states up to 37 horsepower gains at 5500 rpm. I use my car mainly for drag racing. I run 14.3 e.t in the 1/4 mile in hot humid weather. I'm sure it will do even better in cooler horsepower making weather.
Click the link below for info on the performer intake.
Good Luck

http://www.edelbrock.com/automotive_.../ford_sb_fuel-
inject.shtml

1993 GT Mustang / Stock 302 EFI / Edelbrock 5.0 Upper and Lower Intake / 75mm Throttle Body / C&L Cold Air w/76mm Mass Air / K&N Filter / Electric Fan / BBK Underdrive Pulley's / A.C. Removed / BBK Headers / Flowmaster / H-Pipe / T-5 / Alum. Driveshaft / 3.73 Gears / Eaton H.D. Posi / Moser 31 Spline Axles/ Subframe Connectors / Line Lock / Driveshaft Loop / B&M Short Throw Shifter / 16" Chrome Cobra Wheels / Nitto Drag Radials Rear / BFG G-Force Sport Front / Racing Upper and Lower Control Arms / Lakewood Adjustable Drag Shocks/ Holley 190 lph Fuel Pump / Holley Adjustable Fuel Pressure Regulator / MSD EFI Blaster Coil/ Stock Heads/ 19# Injectors