[adriano_917]

OK, so I want to buy this mass air meter from C&L on ebay and i want to know. does this one fit on my 94gt since its the same engine 5.0,302 plus the injectors are also 19lbs aren't they ??? well, will it fit ???

http://cgi.ebay.com/ebaymotors/FORD-...QQcmdZViewItem

[93mustang]

I have that MAF meter on my 93gt mustang with the C&L cold air tube and K&N filter. I believe they are 3-1/2" outside diameter. You just have to make sure that it will fit inbetween your air tube and filter or air box (not sure what you have)
Make sure this comes with a calibration tube that matches your injector size.
Here's a link to C&L. I'd give them a call about this. They are very helpfull

http://www.cnlperformance.com/index.html

[adriano_917]

well i have power adder air filter with optional 3" and 3.5" and the C&L inlet pipe and the mass air meter is 76mm wich is 2.9" it will fit right in but i want to know if they work good and can u fell the difference in air and when u order them do they calibrate it for u ??? what do they mean by gold tube,orange tube,etc ???

1994-1995 Mustang 5.0, 73mm Unit
Std Fuel Injector (GT-19, Cobra-24) Gold Tube (096)
GT 24lb & Cobra 30lb Injectors Orange Tube (097)
GT 30lb & Cobra 38lb Injectors Purple Tube (099)
GT 36/38lb Injectors & Cobra 42lb Injectors Red Tube (103)

[93mustang]

I wouldn't know if you can feel the difference in horse power because mine came already installed when I bought the car.
As far as calibration, these meters use what's called an air sample tube.
You specify your injector size, and the sample tube mounts inside the meter, tapered end toward the filter. Mounts with torx screws provided, very simple.
Works with your stock sensor. See below link. I'd still call C&L first.


http://www.cnlperformance.com/calibration.html

[adriano_917]

ook well thank u very much for your help i think i'll give them a call just to be sure...