[AF_mustang95GT]

I need tips on getting my car set up for drag racing. I have a 95 GT. Currently it is running with Ford Racing 3.73 gears, Hotchkis upper and lower rear control arms, Ford Racing lowering springs(front and rear), Edlebrock Performer RPM intake(upper and lower), BBK cold air kit and a Steeda Tri-ax shifter. What would be the next step in mods that I would need to do? I was thinking subframe connecters. Any ideas would be great, thanks.

[93mustang]

The next cheapest step would be a shift light to keep your times consistant. Subframe connectors, as you mentioned. Drag radials. MSD Ingnition with a 2- stage limiter. Set 1st stage for launch so all you have to do once you are staged is floor it and you'll launch at the same rpms everytime, making your times consistant. Set the 2nd-stage for engine protection in case you miss a gear. All these upgrades will help you launch better and keep you consistant.
As far as going faster, heads, supercharger, headers, exhaust, etc....
It just keeps getting more and more expensive!!!
Good Luck.

[AF_mustang95GT]

Thanks i didnt think about the ignition, couple things I didnt mention was that i already have a full exhaust system, Ford Racing Shroty Headers, Mac H_Pipe w/cats and Flowmaster mufflers. But thanks, good tip