I would get either Bosch or NGK O2 sensors, 4 wire. If you have long tube headers you will need O2 sensor extenders. I have the ford racing 9mm and love them, $40 from summit. A lot of people say they are using autolights. You should get a new coil to.
__________________
95/5.0 Long tube headers, xpipe, flowmasters, with dumps, 9mm plugg wires, msd cap and rotor, 70mm tb, trick flow intake manifold, under drive pullys, smog elim kit. summit coil, subframe connectors, summit double roller timing chain, and a cam not sure what for cam bc it was in the car when i purchesed it!
I would get either Bosch or NGK O2 sensors, 4 wire. If you have long tube headers you will need O2 sensor extenders. I have the ford racing 9mm and love them, $40 from summit. A lot of people say they are using autolights. You should get a new coil to.
Did you have any problem with the car running correctly with the 9mm wires? I know that if yo uuse a wire that is too big, the car will not run correctly.
__________________
1995 Mustang GT - Crystal White
MODS: intake, headers, mid-pipe, cat-back, valentine one...you know, the basics
95/5.0 Long tube headers, xpipe, flowmasters, with dumps, 9mm plugg wires, msd cap and rotor, 70mm tb, trick flow intake manifold, under drive pullys, smog elim kit. summit coil, subframe connectors, summit double roller timing chain, and a cam not sure what for cam bc it was in the car when i purchesed it!
Shop around, you might beat that price at vatozone, or advance.
__________________
1992 Deep Emerald Green Mustang GT Hatch, 5 speed, 2.73s, Mac fenderwell cold air intake, '93 Cobra MAF, Mac 70mm throttle body & spacer, Explorer intakes, Mac unequal headers & offroad pipe, Magnaflow catback, Walbro 110lph fuel pump, Jet adjustable FPR, MSD Blaster coil, Accel 8mm wires, FRPP aluminum quadrant, UPR firewall adjuster, stock cable, Granatelli upper control arms.
Waiting to go on: Granatelli lower control arms, and GT40 Iron heads!
Mustang Tuneup Questions 
