[stangaddict]

I just finished hooking my alarm with remote start everything works great. I was wondering if i could get some help on the window module not 100% on the wiring such as switch up and motor up switch down and motor down. I have a 2004 v6 thanks for any help.

[snowboarder7710]

the switch up/motor up, switch down/motor down means that you need to go to the window motor wires in the driver's door and either in the passenger door or the drivers kick panel for the passenger wires.

(if the module does one touch up and down, then you need to wire it up in the passenger door if you want the passenger switch to operate that way, otherwise if you wire the pass. window in the drivers kick panel, only the driver side switch will be auto up down.)

you go to the up/down wires...there will be 2 wires going into the motor. you have to cut them and the wire that goes to the motor is the motor side (obviously), and the other one goes to the switch side. do that for up and down and you're all set. its fairly simple, just time consuming.

[stangaddict]

Thank you for your respone! I have 1 additional question so the switch wire is actually hooked up to the wire the shows positive when switch is pressed is that correct?

[snowboarder7710]

yep!!...when you meter the cut wire and press the switch, it should show 12 volts.