[daveshea]

Ok, I am preparing to install my sirius radio tomorrow, and need help with some wiring.

I plan to remove the floor console (where the aux input and power point are) and using a 12v to 5v transformer I bought for this purpose, hard wire the radio to the power wires for that power point. That way, the radio is hard wired, but I can still use the power point to charge a phone, etc.

Once I get the floor console removed, I know there is an electrical connector that provides the wiring for the aux input AND the power point.

Can someone help me with figuring out the wiring for the power point? Which wire will be the 12V, and which is the ground?

I assume ground will be black, but what color will the 12v+ be?

Again, this is the electrical connector found inside the floor console.

I searched earlier and did not see this question addressed before. Thanks in advance for any help you can give!

-David

[partsbill]

the power point is a 3 wire connector, only 2 are used, black is the ground and light green is the power which is hot at all times and is overload protected.

[daveshea]

thank you very much! All fixed up on the hard wire part, now I just have to sort out the aux input problem!

-David