Ok well i am about to purchase a new head unit and i have a few questions. First of all i have the shaker 1000 and i was wondering, is the amp in the box with the subs in the back? or is the amp built into the stock head unit?
Also how do i know if this will fit (see attached picture)? and what do i need to make it fit?
Also how do you remove the stock head unit?
Finally will this head unit work with my shaker 1000...heres the description from the site.
7" motorized touch screen & multizone 240W max power Plays DVD,CD, MP3, WMA, AAC, iPod, USB, Secure Digital Card & is SAT-ready Upgraded TFT screen MOSFET power Bluetooth connectivity Picture-in-Picture ESP: 2 MB 7-band EQ with spectrum analyzer 8-preset EQ curves Auto dimmer for TFT MediaPlex twin core engine 5.1Dolby Digital & Pro-Logic II NAV ready Includes full-size & kid-zone remotes Includes MediaLink under-dash interface adapter LinkDirecthigh-speed direct connect interface for playlists, artists, albums, songs, photos & videos Controls all iPod functionsexcept iPod shufflevia touch screen High-performance A grade TFT screen 336,960 pixels MediaPlex single core engine Compatible with DVD+R/RW, CD-R/RW, CD-DA, MP3, WMA, SVCD, VCD, MPEG1/2 & JPEG 2 A/V inputs for external media connectivity for VCR, DVD player & game console 2 composite video outputs for additional screens Plays MP3 & WMA files burned onto DVD+R/RW Supports up to 1,000 songs on a single DVD Compatible with single & dual layer DVD+R 3-band equalizerbass, midrange & treble 8-preset EQ curves Radio Broadcast Data Service Station call letters, song information & artist information Includes 3.5mm RCA media interface cable to connect to other portable device Compatible with various XM & SIRIUS satellite tuners
__________________
2007 GT Premium- Manual, Black on Black, Shaker 1000, Ford Racing 4.10s, MGW Short Throw Shifter, JLT Cold Air Intake, SCT 93 Oct. Race Tune, SSS Offroad Axle-Backs, Chrome Tail Light Trims, Chrome Hood Pins, Roush 1/4 Louvers, GT500 Pedals
Near Future Mods- Steeda LCA's
1987 Camaro RS- Fully restored it over the summer, its sweet
The amps are behind the sub box... Remove the 4 bolts holding it in and pull it out, then there is a metal plate with 4-250w amps mounted to it. 2 on front, 2 on back. The first time removing it can be a bear, but once you figure it out, it's easy.
I removed them and put in 1-1000w. I didn't have any adapters for hooking my amp to the subs, so I cut the lines and put in quick connectors, and kept the other amps and end-plug, just in case I ever sold the car and wanted to put all the original parts back in first.
As for the radio, it should fit fine with an adapter. I would probably recommend flipping the adapter, so the open space is above, that way your unit is set lower and when your screen is open it isn't blocking your air vents. I can't tell what brand your unit is from the pic.
I went with a double din DVD player. no flip screen. It fills the space nicely, and the motorized screens worry me about failure.
Head Unit Help!! 
