If there is not harness in the dash I would just run my own wires. You'll need to find a wire that is 12 v constant (powered regardless if the key is "on" or not) 12 v switched (only has power when the key is in "on" position) and then just run your ground wire to any bare metal you can find in the dash. You'll need to run your own speaker wires as well. Not sure about wiring in through the door loom but you can run your rear wires under the door sills and back seat to the rear.
__________________ Christopher J "The breeze you felt going by...that may have been me" '08 Red Fire GT, Polished 18's, Roush Axlebacks, Spoiler Delete, FRPP CAI & Tuner.....more to come |