[32valveguy]

I have a 94' GT with Factory Mach 460 but no CD player. I've just purchased a stock Mach 460 Slave CD player with harness. The harness has 3 plugs that go into the back of the CD unit, and 3 that plug into the vehicle/head unit. I have all plugged in except the power plug at the opposite end of the harness. (5 wires) that connector was cut-off and I need to know where to tap them in. I believe the missing connector was a gray 5/6 inline plug. Any help?

[8MSBHVN]

You'll probably need the harness from a 460 CD car, or at least the other end to plug it in to the factory cassette player. Otherwise, consider going aftermarket. There's nothing too special about the factory system. If not, try finding pictures or a diagram online telling you what wires are what and where they'd need to be connected.

[32valveguy]

that would be great if you could find a diagram. I just picked this one up for a daily driver and trying to keep the cost down by adding in the factory slave CD player. I bet the wires coming out of the factory tape/head unit are were I need to tap-in. Just need a diagram of what they do and what the ones on the CD unit do so i can match them up. thanks for looking.