[919mustang]

Originally Posted by pcfrisch

Shaker 1000/500 Connector/Wiring

Using this diagram. Which port should i splice into and connect my signal wire telling my amp to turn on. I have tried Port#1 and it stays on even if the car is off. I have tried #15 but it didnt turn it on. Drawing blanks now. What should i do?

Thanks in advance for help with my first post.

[919mustang]

my quote didnt work. So here is the link to the thread it was in...thanks in advance!

http://www.allfordmustangs.com/forum...ly-please.html

[notchbackfox]

are you using the stock radio?

[redrocket93]

the easiest way to find out what wiree to tap into is take the radio out dissconnect the radio grab a test light and find out wich wire is hot only with key forward and splice into the whole thing should take three minutes and is the easy unless you would rather just go to the fuse block and find a fuse that is only hot with key forward and tap into that both take less time then tring to read a wire digram