Need Shaker 1000 help

Baz024 · 10-04-2009

Hi

I have a shaker 1000 system in my stang and am looking to put the pioneer f500bt and the ndg500 amp in it. But after looking at the wiring harness that came with the amp i have realized that i need an adapter of some sort. can anyone tell me what adapter i would need. The wiring harness is a simple piggy back type so basically i need a convertor to change it from fords shaker 1000 plug type to a standard iso type connector.

Beastiezzz · 10-04-2009

I added a pioneer navigation unit to my shaker 1000 system and i didnt need any kind of adapter besides a wiring harness. Just make sure its made for the shaker systems and has rca connections to hook up the subs.

Baz024 · 10-04-2009

HI
yeah thats what i need the wiring harness, but theres so many different kinds and none seem to be the right type without splicing into cables and why would i need rca cables on it there isnt any on the wiring harness thats allready there?

Beastiezzz · 10-04-2009

go to your local car audio shop and tell them you need the harness. they should have it in stock. your new pioneer head unit has rca outputs for the subs and the new harness will have the correct connections to make them work.

Baz024 · 10-04-2009

Unfortunately its not the same type of thing its litterally just a wiring harness that has an iso input connector that you plug the wiring from the car into and then two iso cables you plug into the shaker 1000 and one cable that you plug into the pioneer avic f500bt so basically its a piggy back unit that you just seem to almost hack into the original wiring... all the inputs and out puts are basic ISO connections but obviously the connection on the shaker 1000 and the connection from the mustang isnt basic ISO . kinda really confusing system ive spoke to bestbuy guys, and other electronics shops . no one seems to think i can jus get a plug an play lead. but I have found things that look similar. I think i can buy the male and the female connections and just cut off the connections on the harness that comes with the Pioneer harness and wire them to the bought mustang male an female connections but im really not sure bought it... Im thinking though there has to be a very simple way that i can do it really

Beastiezzz · 10-05-2009

they are trying to sell you something you dont need. all you need is a simple harness 12.00 on ebay. trust me I have done the install on my 05 GT w/ shaker 1000.