[mineralgrey02GT]

i checked out the area around my radio, and I don't have the standard 4 holes that everyone speaks of. I don't have either Mach setup, and it's a combo CD/tape deck.

do I pop off the entire plastic trim from the A/C vents down to the console and unscrew it from there?

any help would be appreciated...

[dave 02 gt]

sounds like you have a aftermarket head unit. take the trim pannel off an see if there are screws there. good luck.

[awstanggt2]

There are no four holes on the 6 disc changer on the mach system. when you remove the center console panal, there are two screws below unit that unscrew and the unit popps right out.