[WildJester]

Hello, I Just purchased a JL Audio Subwoofer w. stealthbox for my 2000 V6 Mustang Convertible (equipped with the Mach 460 sterio system. I replaced the stock reciever with a Pioneer AVIC-N2) I also purchased an Alpine MRP M350 Amplifier in order to amp the sub. The amp kit i purchased is Rockford Fosgate Dual Amp 4-Gauge Power & Interconnect Kit. The reason i got this one is cause i may decide to add new speakers, and an amp for the speakers.

(in case not clear above, the avic-n2 is installed and works great. i just need to install sub/amp/ampkit)

Okay so now that you know what i am working with...

I just want to know if anyone has any suggestions for installing it. I really would love it if somebody happens to know where to run the wires from the firewall to the trunk. (hood->Trunk) alright thanks a lot!

All tips are greatly appreciated!!


Thanks again
Jon

[lcurle]

moved the thread to audio forum.

Anywho you can run the power wire from the battery to the trunk though the firewall gromet by the drivers side. Catch it and run it under the carpet under the trim peices on the floor. Up and under the rear seat and into the trunk. Pretty simple just have to push the wires and hid them as best as possible. Make sure you dont run the RCA's or speaker wire down the same side as the power wire or you can get some static noise through your speakers.