[wallfruit]

I am putting my factory head unit back into my car(due to break in) and wanted to know if anybody had instructions on how to take out my dash, and what the screw sizes are that go into the front brackets, thanks for any help possible.

[thomasusmc]

That sucks man, it happened to me last month.

My insurance paid for it, so I didn't do any work myself.

[shinerstang]

What year car is it? Is it and auto or stick?

[lcurle]

i dont think there are any screws, just plastic retainer clips

[wallfruit]

03 standard. At the bottom of the face there is 4 holes(2 on each side) inside of two mounting plates. Thanks

[shinerstang]

Yeah, just the clips to take out. My Son ahd the same problem, but he has a '97 auto. He actually put his stocky back in and put his good one where the little cubby hole was behind the shifter. That way, they can't get the stereo out without taking it out of park which you would need the keys for. Pretty smart!

[wallfruit]

Can anybody tell me how to get the dash apart?

[kscoyote]

Originally Posted by wallfruit

Can anybody tell me how to get the dash apart?

Pullup the shifter bezel.

pull out the stereo bezel.

[lcurle]

redirecting to audio forums

[Shine1Stang]

ya dude, u dont need to take the dash apart. just the radio bezel. now im not familiar with yours but i know that in order to take mine out there where two small screws that needed to be taken out or you would brake the clips. then the f***ing thing will never sit right!!

[kscoyote]

Originally Posted by Shine1Stang

ya dude, u dont need to take the dash apart. just the radio bezel. now im not familiar with yours but i know that in order to take mine out there where two small screws that needed to be taken out or you would brake the clips. then the f***ing thing will never sit right!!

Oh yeah, but you see them as soon as you take out the shifter bezel(at least on mine).

I epoxied the thin parts of plastic and the clips to keep it from vibrating while I was in there