Jarrett Hey man,
I thought I would ask you, since you live here in AB, do you know of anyone, or would you recommend anyone in Edmonton, or Calgary, that could rebuild my motor. I know there are many outfits in both cities, but I would rather deal with someone who was recommended to me.
I would like to spend no more than about $3500, but I don't even know what a $3500 rebuild would achieve for me.
Like I have mentioned, I would like about 300 rwhp, but still maintain daily drivability status.
Also, what can a guy do himself? I have never done serious motor work, but am anxious to learn.
Thanks again Jarrett.
Peter
__________________ 89 LX - 382 rwhp/407 ft/lbs - KB 2.1 Flowzilla @ 10psi on GT40 lower, MSD dizzy, coil & ignition, 90 LMAF - 42# injectors - 75mm TB, Trickflow Heads and rockers, Stage 2 Snow Meth kit, GMS K-member, arms and front coilovers, Alum. DS, , Steeda Alum U&L arms, U&L Battle Boxes, BBK CC Plates, MM Bumpsteer, Steeda Adjustable R. Swaybar, FRPP 3.73's, front control arm bushings, Earls SS brake lines, 73mm Lincoln Calipers, SSBC rear disk kit, Steeda triax, cables and adjuster
Last edited by Cool89gt; 06-10-2002 at 01:12 PM.
|