[wolfdog]

I have a 1966 mustang for a parts car it has a v8 429 I have a 68 mustang that has a 200 cyl can i take the rear end and front end from the 66 and put them in the 68 so i can put a v8 in it i would like to put a 289 in it not the 429 that would be a lot of trouble not sure tho or maybe it would be best to leave it along. thanks

[andrewmp6]

The 66 rear end is too short unless you make custom rims made to make up for the size they will be sunk in.The front suspension nothing will work the 64-66 is on its own the 67 on its own 68-73 is on its own.

[wolfdog]

Thanks for your help i had no idea there would be that much of a change in the two cars thanks again for your help.

[kens67mustang]

there's no way you have a 429 in a 1966 stang, unless you cut the car up to get it to fit.

[kens67mustang]

suspension parts will interchange between the 67 & the 68 mustangs

[andrewmp6]

No 67 is on its own 68-73 front suspension.

[Cdvision]

Originally Posted by andrewmp6

No 67 is on its own 68-73 front suspension.

Wrong. 65-66 interchange,67-68 interchange,69-70 interchange and 71-73 interchange.