[blackjack99]

do I need new hinges or would WD-40 do the trick? They both have a really obnoxious creak whenever I open them...

[Phil95gt]

Originally Posted by blackjack99

do I need new hinges or would WD-40 do the trick? They both have a really obnoxious creak whenever I open them...

WD-40 would last a little while.U probably need new door pins.

[blackjack99]

Originally Posted by Phil95gt

WD-40 would last a little while.U probably need new door pins.

how much would those cost? And where could I get them?

[Phil95gt]

Originally Posted by blackjack99

how much would those cost? And where could I get them?

They don't cost much 5 or 10 dollars.U should be able to get them at your local hardware store[autozone,orielly,advance]or what u have in your area.I bought some for a 77 cobra 2 and it solve my problem.Time consuming though,i had to cut the old ones out.

[blackjack99]

Originally Posted by Phil95gt

They don't cost much 5 or 10 dollars.U should be able to get them at your local hardware store[autozone,orielly,advance]or what u have in your area.I bought some for a 77 cobra 2 and it solve my problem.Time consuming though,i had to cut the old ones out.

you actually had to cut them out? Like with a saw? I dont really want to go hacking away at my mustang...

[Phil95gt]

Originally Posted by blackjack99

you actually had to cut them out? Like with a saw? I dont really want to go hacking away at my mustang...

Well some years u might be able to hammer them out using a punch,but the 77 i had to cut them out.See i took off the doors off the hinges and then cut the pins out the hinges with a grinder.U could buy new hinges but there going to cost u.Maybe 100 dollars or more.When i cut them i was extremely carefull doing this so i didnt damage anything on my car but the old pins.That's why i said time consuming because it took me all day to do it.

[6t5mustang]

i have a jeep cherokee that the door drove me nuts with creakin, i used motorcycle chain lube in a spray can on it, lasts a long time