[davrom0]

Hi all,
This is my first post besides my introduction. Does anyone know the procedure for installing new headlight buckets or front fender extensions as sometimes called. I have a 1967 mustang fastback.
Do you have to remove the fender ? Seems like it on initial try.
Any suggestions for this? I hate to start taking the fender off if it is not nessasary.
thank you !

[rodbender]

First Look at the trim ring ( around the headlight). It has four screws holding it in. Remove them. Once the trim ring /door is removed, you will find the four 1/4 inch bolts holding on the bucket. It's that easy. Don't forget to unplug your headlight.

[Jay H 237]

The grille molding has to be removed too along with the fastner (sometimes missing/broken) that the tab of the headlight extension bolts to the filler (gravel) panel behind the bumper.

[yellowtonka2]

i dont know about all the others but my 67 fastback the buckets are bolted from the rear of the bucket. you can remove them without taking off the fender with a long extention and ratchet but it is a little aggrevating especially the top inside bolt. but also you do need to unbolt it from the stone guard and grille.

[nickgt350]

dont need to take the fenders off a long extension and contorted hands will get it done