[silvercat]

I am wondering what parts are used to close off the oil filler hole on the passenger side valve cover. I have seen only one engine detail photo that has a view but it is blurry. It looks like a rubber grommet and a plastic 90 degree elbow. Can anyone clarify the correct parts and if it is a 90 degree elbow, where does it connect.

So I am looking for a supplier for these parts:

1. RH vc parts as described above
2. correct coil bracket
3. hose that connects from the PCV on the LH valve cover to the carb
4. correct autolite oil breather cap, PCV valve, rubber grommet etc
5. the parts that connect to the smog openings on the rear of the D0OE-R SCJ cylinder heads and the parts that attach between the heads.
6. full smog system with pump, hoses, brackets - the complete system.
7. any other advice or information

Thanks
George

[dakine858]

Originally Posted by silvercat

I am wondering what parts are used to close off the oil filler hole on the passenger side valve cover. I have seen only one engine detail photo that has a view but it is blurry. It looks like a rubber grommet and a plastic 90 degree elbow. Can anyone clarify the correct parts and if it is a 90 degree elbow, where does it connect.

So I am looking for a supplier for these parts:

1. RH vc parts as described above
2. correct coil bracket
3. hose that connects from the PCV on the LH valve cover to the carb
4. correct autolite oil breather cap, PCV valve, rubber grommet etc
5. the parts that connect to the smog openings on the rear of the D0OE-R SCJ cylinder heads and the parts that attach between the heads.
6. full smog system with pump, hoses, brackets - the complete system.
7. any other advice or information

Thanks
George

I attached a labeled diagram of your PCV system, which includes the oil filler cap assembly.