[MustangMike66]

Hello everyone. I have a 66 Coupe that I had started as a restoration project. However I have discovered that this is going to require a lot more time and skill than I have. I have been working on the project for over a year and have completely torn the car down to a shell and started to replace some of the sheet metal.

I’m thinking my best bet at this point may be to cut my losses and sell everything off. I would ideally like to sell the entire package for $3,000.

Parts I have:

• Body (shell)
• Doors
• Hood
• Trunk Lid
• Glass
• Rear End
• Drive Shaft
• Two Bucket Seats
• Rear Back Seat
• 302 (Motor was rebuilt about 5 years ago and ran at the time I pulled it from the car)
• C4 Automatic Transmission
• New upper and lower control arms (Not yet installed)
• Master Bolt Kit
• Lots of other original parts I was able to salvage

If you are interested please send me an email (michael_j_norman@yahoo.com).

[MustangMike66]

I forgot to mention that I also have:

Both Fenders

Granada disc brake conversion parts:

• Tie rod ends
• Rotors
• Calipers
• Master Cylinder
• Spindles

I will try to get pictures up as soon as possible.

[MustangMike66]

I'm willing to entertain ANY offers!

[MustangMike66]

Mustang is SOLD. Thanks.