[akunschner]

Can any one tell me if I can use these heads on my 302 engine? The casting number on the block is D1OE- 8015AA I think this tells me the engine is from a 1971 Fairlane or Torino not sure what the rest of the numbers mean. If someone could tell me that would be great.
The heads that are available to me have been rebuilt with alum. roller rockers have.hardened exhaust seats,new spings,new comp cams screw in studs and guide plates, casting# C9TE according to the casting number they are from a 1960 Truck or Bronco engine.

[soccer1061287]

C9TE indicates a 69, but I need the two letters at the end to look up the chamber volume and such

[akunschner]

The only other numbers that are on the heads are 9l26

[rodbender]

If they're on a 302/289, yes they'll fit. 58.2 cc chamber volume. Yes truck head- more compression. If they're on a 351, they'll fit with some mods ( 351s have bigger head bolts).

[MIL1ION]

As I replied on the other site, That is a 351W block

The heads are for a 69 Truck and I doubt they are for a 69 Truck 302

I have some 86 302 HO heads from a T-Bird that are all done up already that need a home

[akunschner]

Originally Posted by MIL1ION

As I replied on the other site, That is a 351W block

The heads are for a 69 Truck and I doubt they are for a 69 Truck 302

I have some 86 302 HO heads from a T-Bird that are all done up already that need a home

Thanks Dennis, I was looking to buy these heads because of the price, I think I will pass, what would it cost to move yours to a new home?