[67Ken]

I would like to know if Ford ever produced a 1967 notchback/coupe/hardtop GT. I've seen GTAs (a GT with Automatic transmissions) and GT fastbacks but how about a coupe GT with manual transmission in '67. I know 3spd and 4spd were available. I believe the GT package was fog lights in the grill, horizontal stripes just above the rocker panels on both sides and the rear valance was notched out for the twin rolled exhaust tips right?) Seems a likely configuration, if this configuration did exist, any pictures you could share would be greatly appreciated!

[hypostang]

A manual transmission was available in any body style GT Mustang.
Coupe, convertible, and fastback in 1967

[67Ken]

Originally Posted by hypostang

A manual transmission was available in any body style GT Mustang.
Coupe, convertible, and fastback in 1967

Right, it's just that I can't find 1 picture on the internet of a manual trans. GT coupe... I'm putting in a T5 transmission into my '67 and it will be a GT clone, would there be any differences in how a GT vs. GTA looked as far as rocker panel stripes, lettering etc.?

Is the only difference the badge in the rocker panel stripe - instead of GTA it would say GT?

Thanks all.

[Calponycarsmike]

1967 Mustang GT

Side Stripe with GT or GTA badge (same stripe was used)
4 inch driving Lights in grille
Power Disc Brakes
Chrome quad exhaust tips
GT Gas cap

If you added the Exterior Decore Group you also got:
Pop-Open Gas Cap
Rear Aluminum Ribbed Tail Lamp Panel

Pic

http://z.hubpages.com/u/828193_f520.jpg

[67Ken]

Originally Posted by Calponycarsmike

1967 Mustang GT

Side Stripe with GT or GTA badge (same stripe was used)
4 inch driving Lights in grille
Power Disc Brakes
Chrome quad exhaust tips
GT Gas cap

If you added the Exterior Decore Group you also got:
Pop-Open Gas Cap
Rear Aluminum Ribbed Tail Lamp Panel

Pic

http://z.hubpages.com/u/828193_f520.jpg

Great, thanks for the info and picture! Was the chrome wheel well trim and chrome rocker panel covers part of an exterior package as well or just an option?

[Calponycarsmike]

Exterior Decor Group
Included a hood with rear-facing louvers that housed turn signal indicators Wheelwell Moldings
Pop-open Gas Cap

My first post was not clear the Aluminum Finned Tail Lamp Panel was an option but you had to order the Exterior Decor Group to get it.

Also the Bright Rocker moldings were only standard on the Fastback in 1967 and were not included on the Exterior Decor Group, they were again an option for Coupe and Convertible.

[kens67mustang]

Originally Posted by 67Ken

Great, thanks for the info and picture! Was the chrome wheel well trim and chrome rocker panel covers part of an exterior package as well or just an option?

Ford made a GT and a GTA.............GTA was just a GT with an automatic.the GT for 67 was a small block or the more popular,big block S code 390/4 speed(GT),or the s code 390/C6 ( GTA)

[kens67mustang]

[quote=kens67mustang;1645174]Ford made a GT and a GTA.............GTA was just a GT with an automatic.the GT for 67 was a small block or the more popular,big block S code 390/4 speed(GT),or the s code 390/C6 ( GTA)[/The lower rocker panel covers were an option on ALL Mustangs you could get a fast back for either 67 or 68 with NO covers.They could be deleated,like the coupe or the Convertible...........the "Verts usually just got the tape stripe for the rocker panels,But the covers were standard on the base 67 notchbacks

[hypostang]

Originally Posted by 67Ken

Is the only difference the badge in the rocker panel stripe - instead of GTA it would say GT?

Thanks all.

In a nut shell, yes that is the only difference in appearance

[Calponycarsmike]

"The lower rocker panel covers were an option on ALL Mustangs you could get a fast back for either 67 or 68 with NO covers.They could be deleated,like the coupe or the Convertible...........the "Verts usually just got the tape stripe for the rocker panels,But the covers were standard on the base 67 notchbacks"

Not according to the Mustang Recognition Guide, Mustang Restoration Guide and Mustang Does It, Books. All 1967 Mustang Fastbacks came standard with Rocker Panel Moldings, but they could be deleted, just like the rear wing on Mustang GT's today, it is standard equipment, but you can special order it with wing delete. Rocker Moldings were optional on Coupe and Convertible with the exception of the Indy Pacesetter Special Edition it got its own narrow rocker panel molding.