[Florencio]

Hi, what is the best way to finish the inside of fenders, is it correct to pait it with the same pait of the car, or there is an speciall product.
Any photos will help
Thank you very much

[429ragtop]

I always use a spray on type rubberized undercoating in these areas (on top of the paint)

[drummingrocks]

I've had good luck with a product called Gravitex. It sprays through a special gun, and closely mirrors the finish of Ford's undercoating. It also dries quickly, and is rock hard when it dries.

[Jonk67]

I plan to use bedliner from a spray can, dries pretty hard with 2 coats. Should stop most thrown rocks from hitting the underside of the fender and causing a dent or star in the paint on the top side, paint only won't. I just plan to do the flat part that is the top of the fender, not the sides.
Jon