help on a rear end set up

slmdlow · 10-13-2009

I have gotten a 9" rear end but i got it from a car that had coils. i will be removing all the brakets that held the originol set up. I need to now the right angle to set up the rear end since i will be welding new perches to it to use it on leafs. Any help will be apreciated.

429ragtop · 10-14-2009

You need to mock it up to find your angle. With the car on all fours and with full weight, set the housing in place as a complete assembly and find out where it needs to be to line up with the driveshaft and differntial yoke, mark it and your done. Or you could tell us the year and model and someone could give you measurements assuming nothing is modified.

RF Mustang · 10-15-2009

Try this website, they have the most information I have ever found on the Ford 9" rear end

www.kevinstang.com/Ninecase.htm

RF Mustang · 10-15-2009

Sorry, i forgot to mention that at the end of the information of kevinstang web page is a list of about 10 websites with info on 9' rear ends and set ups.

Good luck