[GGregory]

Ok now I'm about ready to weld the outer wheel housing, but I read that you should wait untill you weld the rear quarter also. This may let you have more play to work the quarter if you also fit/adjust the outer wheel housing at the same time. Has anyone done it either way?

Thanks, Greg 66 fastback A-code

[429ragtop]

you dont need any play when doing the quarter assuming the well was positioned correctly when done.

[429ragtop]

also, make sure you skip weld or you will warp that quarter lip.

[Jay H 237]

Look at this like, it may give you some ideas,

Mustang RH Quarter Replacement - Part 4