[sticken2it2]

You can but the kit and spend money needlessly Here is the scoop

autozone 2 83-88 4 cyl ford ranger rotor bolt on app. that the front

junk yard rear axles from a 86-97 4 cyl or 3.0v-6 aerostar (only right side) 29-5/32 ( means you need to get them from diff. vans)get the drums also.

you got five lug pony car this does work out good I have converted
3 cars a 90 LX , 89 LX and 86 GT

just want to share with fellow for lug mustang owners

[One87 T-Top]

what junkyard parts do you recomend for a five lug rear disk conversion?

[dakotah2007]

i have a 1989 coupe 4 cyl i used the 94 mustang spindles on front and 98 mustang disc rearend .i have 9 inch bullitts and have had no problems.been a daily driver for 8 months.

[86Stang5.0]

ok so im doing a swap on my 86 mustang LX. it was a 4 cyl car, now a 5L. my question is ive been told that i can use the rotors off a ranger for the front, its all the same but the rear bearing and racer are different size than the spindle on the mustang. is there another car i can use the rotors from, ive been told that a mark VII would work, but i would come across problems because its a 4 cyl set up. and id also like to keep it a 9 inch rotor.

[85MUSTANGGT]

Here is some info:

http://www.allfordmustangs.com/forum...ang-5-lug.html